Chimney Flashing Repair in Westbrook, CT. Fix the Roof-to-Chimney Transition.

Roof Repair Pro provides chimney flashing repair throughout Westbrook for leaks and failures where roofing meets masonry. We repair step flashing, counterflashing, apron flashing, back-pan or saddle details, surrounding shingles, failed sealants, and localized decking damage around chimney transitions on shoreline homes, older masonry chimneys, additions, and commercial buildings.

Black shield icon with a white checkmark inside

Licensed and Insured

HIC #0706616

Black star icon on a white background

35+ Years Shoreline Experience

Why Chimney Flashing Deserves Its Own Repair Service

Chimney flashing is one of the most complex transitions on a pitched roof because runoff has to be redirected around all four sides of a masonry penetration. A failure in one piece can send water behind the rest of the flashing system and into the roof deck, wall cavity, or chimney chase.

Chimney flashing repair has a more specific diagnostic scope than general roof flashing work, which is why Roof Repair Pro treats it as its own service while step, wall, vent, pipe, and other flashing types remain grouped on the broader flashing page.

Chimney Flashing Components We Repair

Black crossed wrench and screwdriver icon on a white background

Step Flashing

Individual step-flashing pieces protect the sides of the chimney where each shingle course meets masonry, and a failed piece can allow water behind the roof-to-chimney joint.

Black wrench crossed with screwdriver repair icon on a white background

Counterflashing

Counterflashing overlaps step or base flashing and is integrated into or sealed against masonry so water cannot enter behind the upper edge of the roof-side flashing.

Black crossed wrench and screwdriver icon, representing tools or maintenance.

Apron Flashing

Apron flashing protects the downslope face of the chimney and directs runoff onto the roof surface rather than into the joint where masonry meets shingles.

Black wrench crossed with an X icon on a white background

Back-Pan and Saddle Flashing

The uphill side of the chimney needs a back pan or saddle detail that diverts water around the masonry, especially on wider chimneys where a larger volume of runoff collects.

Black wrench and screwdriver crossed on a white background, symbolizing tools or settings

Surrounding Shingles and Decking

Water entering through failed chimney flashing can also damage nearby shingles, underlayment, and decking, so we inspect the complete roof-side transition rather than only the visible metal.

How We Diagnose and Repair Chimney Flashing

White right-pointing arrow inside a black circle icon

Step 1: Inspect the Leak Pattern

We review interior staining, attic evidence where accessible, and exterior conditions to understand how water may be moving around the chimney.

White right-pointing arrow inside a black circle icon

Step 2: Inspect Every Flashing Component

We check the sides, front, back, mortar joints, surrounding shingles, sealants, and accessible decking so the failed part of the system is isolated.

Black circular button with a white right-pointing arrow icon

Step 3: Identify the Failed Detail

We determine whether the water entry is coming from step flashing, counterflashing, apron or back-pan details, failed sealant, nearby shingles, or localized roof damage.

White right-pointing arrow inside a black circle icon

Step 4: Provide a Written Quote

We explain the repair scope and provide a written price before opening the affected roof area.

White right-arrow icon inside a black circle

Step 5: Complete the Roof-Side Repair

We repair or replace the failed flashing components and any localized surrounding roofing damage connected to the leak.

What If the Chimney Leak Is Not Coming From the Flashing?

Water around a chimney can also enter through the cap, crown, chase cover, or upper masonry. If inspection shows the source is above the roofline rather than the roof flashing, we can refer that chimney-top scope to Chimney Cap Pro of Connecticut so the correct component is repaired.

Know What You Are Paying Before We Show Up

Repair cost depends on the exact failure, roof pitch, access, masonry condition, materials, and whether surrounding shingles or decking also need attention. You receive a written quote before work begins and the full roof-side scope is explained before you decide to proceed.

Get the Problem Diagnosed Before It Gets Worse.

Small roof-to-chimney failures can become larger water problems through repeated rain, coastal wind, and winter cycling. Call to schedule an inspection for chimney flashing repair in Westbrook, CT before water spreads farther into the roof system.

Frequently Asked Questions About Chimney Flashing Repair

Common questions we hear from Westbrook homeowners and property owners.

  • How do I know if chimney flashing is leaking?

    Chimney flashing may be leaking if staining appears near the chimney, attic moisture is visible around the chase, or leakage becomes worse during wind-driven rain. The failure can occur at step flashing, counterflashing, apron flashing, the back pan, sealant joints, or adjacent shingles, so inspection is needed to separate roof-side and chimney-top sources.

  • Can chimney flashing be repaired without replacing the roof?

    Yes. Chimney flashing can often be repaired as a localized project when the surrounding roof remains serviceable. The repair may involve resetting or replacing flashing, carefully lifting nearby shingles, correcting sealant joints, and repairing limited decking if water damage is discovered.

  • Is chimney flashing the same as a chimney leak?

    No. Flashing is one possible source of a chimney-area leak, but water can also enter through the cap, crown, chase cover, masonry, or other upper-chimney components. Diagnosing the source first keeps roof-side and chimney-top work with the correct specialist.

  • Do you replace counterflashing?

    Yes, when failed counterflashing is the source and the surrounding roof and masonry allow a proper localized repair. Loose, corroded, poorly embedded, or separated counterflashing may need to be reset or replaced as part of restoring the roof-to-chimney drainage system.

  • What areas do you serve?

    We provide chimney flashing repair throughout Westbrook, including Westbrook Center, Pilots Point, West Beach, Coral Sands, Chapman Beach, Westbrook Center, Grove Beach Point, Grove Beach Terrace, Middle Beach, Kelsey Point, Pointina, Old Salt Works, and the Boston Post Road / Route 1 corridor.

  • What warranty do you offer on chimney flashing repairs?

    Our chimney flashing repairs come with a one-year workmanship warranty. If the same spot leaks again within one year, we'll come back and fix it at no additional cost.

Stop Water at the Roof-to-Chimney Joint.

If water is showing up around your chimney, Roof Repair Pro can inspect the complete roof-side transition, identify the failed detail, and provide a written quote for chimney flashing repair in Westbrook, CT.